Tel:+86-571-826 883 63
+86-182 584 02850
Fax:+86-571-838 647 37
E-mail:info@gsrthreads.com
Workpiece material machinability is the key to tapping. Tap manufacturers main concern now is to develop
Taps for a particular material. The properties of these materials, tap change geometry of the cutting parts, in particular its horn and depressed (HOOK)-previous depressed levels. The highest processing speed is sometimes limited by the performance. For smaller males, spindle speed in order to reach the desired speed [RPM= (SFM x 3.8) diameter/tap], may have more than the maximum spindle speed. The other hand, high speed cutting with larger taps will produce greater torque, larger than the horsepower provided by the machine. 700psi cool tools, cutting speeds may reach 250sfm. Without the cooling facility machine tool, cutting speed can only be up to 150sfm. Males are different from most of the metal-cutting tools, because it and the hole wall of workpiece contact area is very large, so cooling is essential. If HSS taps overheating, then push wire broken, burned, NORIS high performance wire hung geometry features is the large posterior horns and inverted cone. ”
Previous: Increased Use Of Carbide Taps
Next: Tap Use
Related News
- Tool Introduction
- Tool Holder
- Tool Purchase
- Power Tool Holder
- Brief Introduction To Mould Bases
- What Is Mold
- Introduction To Tap
- Tap Components
- Tap Use
- Increased Use Of Carbide Taps
- China Homelife Exhibition-Dubai
- Popularize Of Hangzhou GSR-Threads ...
- About Us-Hangzhou GSR-Threads Tools...
- The Raw Material In China Had A Gre...
- What Is A Threading Die?
- The Difference Between Manual Taps ...
- Composition And Application Of Stra...
- The Africa World Expro(Tools And Bu...
- What Is The Difference Between What...